Hospitality steel Kolkata & Howrah
Exposed steel
that has to look
finished.
Hotels, resorts, banquet halls and restaurants. Exposed steel in a guest area is furniture as much as structure — ground welds, tight tolerances, laser-cut detail and coatings that survive close inspection under warm light. We work in operating properties too, on night shifts, with dust and noise controlled.
Furniture as
much as
structure.
Ground and dressed exposed welds, laser-cut detail, coatings that survive close inspection under warm light — with architect and interior coordination throughout.
Laser-cut jaali & partition screens
Architectural pattern work for facades, lobbies and partitions, cut and finished in-house.
Column-free banquet spans
Long-span structural steel for banquet halls and event floors, detailed for clear sightlines.
Porte-cochère & entrance canopies
Arrival structures that set the first impression, built to close tolerance.
Feature & cantilever staircases
Structural centrepieces where the weld quality is the design, not hidden behind it.
Atrium, skylight & glass support
Structural steel engineered to carry glazing loads while staying visually light.
Rooftop bars & pool decks
Structural steel for rooftop amenity spaces, coordinated with waterproofing and MEP.
Balustrades & architectural railings
Powder coated, PVD or mirror polished finishes to match interior specification.
Signage, lettering & wayfinding
Brand lettering and wayfinding cut in mild steel, stainless, aluminium or brass.
We work while
the doors stay
open.
We'd rather cut and weld at Liluah and bolt on site than run a grinder in a lobby.
Night shifts
Structural and finishing work scheduled around your operating hours, not the other way round.
Hot-work permits
Every welding or cutting operation on site runs to a permit, logged and signed off.
Dust & noise control
Barriers, extraction and scheduling that keep guest areas usable during works.
Fire watch
Dedicated fire watch on every hot-work shift in an occupied building.
Protected finishes
Existing flooring, fittings and finishes masked and protected before work starts.
Architect & interior coordination
Shop drawings and site sequencing coordinated directly with your design team.
Most of the
weld happens
before we
arrive.
Cutting, fabrication and finishing at Liluah keep site time, and disruption, to a minimum.
Engineering & shop drawings
Structure sized and every connection designed against your architect's drawing, issued for approval before anything is cut.
Cut & fabricate off-site
Laser cutting, bandsaw work and welding happen at Liluah, under our own supervision, away from your guests and operations.
Finish to specification
Ground and dressed welds, powder coat, PVD or mirror polish — matched to your interior design spec before dispatch.
Install on your schedule
Night shifts, hot-work permits, dust control and fire watch for the site work that has to happen in place.
What buyers
ask us.
Can you work inside a hotel or building that's still operating?
Yes — it's a large part of why we focus on hospitality. Night shifts, hot-work permits, dust control, fire watch, protected finishes. We'd rather cut and weld at Liluah and bolt on site than run a grinder in a lobby.
Can you match our interior finish specification?
Yes. Powder coating, PVD and mirror polish are all available, coordinated with your architect or interior designer before fabrication.
Do you coordinate directly with our architect?
Yes. Shop drawings, connection details and site sequencing are worked through with your design team before anything is cut.
What if the site only allows work at night?
That's normal for hospitality work. Structural and finishing installation is scheduled on night shifts as standard, with hot-work permits and fire watch for every session.
Do you handle laser-cut screens as well as structural steel?
Yes, both come from the same file where relevant — a gusset plate and a lobby screen can be nested and cut together, then finished to the same specification.
Do you deliver outside West Bengal?
Yes — dispatch and site teams cover pan-India project work, with freight and crew travel quoted separately.
Send the
drawing, the
DXF, or just
the tonnage.
Laser cutting, material, a full turnkey package or a contract crew — tell us which and you will get a named person, a buildable view and an honest programme.
- Works & stockyardLiluah, Howrah
West Bengal, India - Head office22 Strand Road
Kolkata 700 001, West Bengal - Project enquiriesprojects@steeltechglobus.com
- Laser & tradingsales@steeltechglobus.com
- Telephone+91 91239 93022+91 62897 33378
- WhatsApp+91 91239 93022
- LinkedInSteeltech Globus ↗
- Instagram@steeltechglobus ↗
- Working hoursMon–Fri · 11:00–20:00
Sat · 11:00–18:00
Replace the address, emails and phone number with your real details.