PEB systems Manufacturer & erector
Rigid frames.
Purlins. Sheeting.
A bolted kit.
Complete pre-engineered buildings: tapered built-up rigid frames, Z and C purlins and girts, sheeting, mezzanines, crane provisions and accessories — designed to your loads, fabricated to spec, delivered to site as a bolted kit ready to erect.
Every piece,
numbered
and bolted.
Frames, secondaries, envelope and accessories — designed together, dispatched together, erected in sequence.
Tapered built-up rigid frames
Primary structure sized against your span, bay spacing and load case — efficient use of steel, welded and match-marked at the shop.
Z & C purlins, girts, sag rods
Secondary framing for the roof and walls, cold-formed to standard sections and delivered cut to length.
Sheeting, insulation, skylights
Roof and wall envelope, with insulation and daylighting where the design calls for it.
Mezzanine floors
Integrated steel mezzanines where the plan needs a second level — office block, storage or production platform.
Crane provisions
Runway beams, brackets and rails engineered for the crane capacity you specify, ready for EOT installation.
Accessories
Louvres, turbo ventilators, gutters, downtakes, doors and windows — everything the building needs to close out on site.
Warehouses.
Workshops.
Factories.
Clear-span steel buildings where speed of erection and load-efficient design pay off.
Warehouses & logistics sheds
Column-free spans for storage, racking and material handling — with crane runways and mezzanine offices as needed.
Manufacturing & workshops
Production halls with EOT crane provisions, service floors and utility routing coordinated into the primary steel.
Cold storage & food processing
Insulated envelope PEB shells sized around cold-room and processing layouts.
Distribution & last-mile hubs
Fast-track sheds for e-commerce, courier and 3PL operations, with dock levellers and canopies integrated at design stage.
We won't
sell you a
PEB anyway.
A PEB is the right answer for a lot of buildings — but not all of them. Where conventional framing suits your loads and layout better, we'll say so instead of forcing a rigid frame around the wrong problem. Heavy point loads, non-standard geometry, or a hybrid steel-and-RCC scheme sometimes read better as conventional structural steel, and we'll quote that route where it applies.
From loads
to bolted
up.
Design, fabrication and erection under one accountable line — not handed off between three vendors.
Load case & layout
Span, bay spacing, crane capacity, live and wind loads worked through against your site and use case. Budget rate offered against provisional tonnage.
Engineering & approval drawings
Primary and secondary framing designed, general arrangement and shop drawings issued for your approval before fabrication starts.
Fabricate & match-mark
Frames welded, secondaries cold-formed, everything painted or coated and match-marked so it lands on site in the right sequence.
Deliver & erect
Kit delivered in dispatch sequence, erected by our teams or handed over to your contractor with drawings and bolted connection schedules.
What buyers
ask us.
Do you supply PEB, or only conventional steel?
Both. A full PEB system — frames, purlins, sheeting, mezzanine, crane provisions — delivered as a bolted kit. Where conventional framing suits your loads better, we'll say so instead of selling you a PEB anyway.
Can you handle design as well as fabrication?
Yes. Primary and secondary framing designed against your load case, with general arrangement and shop drawings issued for approval before anything is cut.
What sizes and spans can you deliver?
Most single-storey PEB requirements — typical clear spans from small workshops through to large warehouse sheds — are covered. Send your span, bay spacing and crane requirement and we'll work through it.
Can you include EOT crane provisions?
Yes. Runway beams, brackets and rails are engineered for the crane capacity you specify, and left ready for EOT installation.
Do you erect on site, or only supply the kit?
Either. Erection can be handled by our teams, or the kit can be handed over to your contractor with drawings and bolted connection schedules.
Do you deliver PEB outside West Bengal?
Yes. Kits are dispatched pan-India by road, with freight and erection travel quoted separately.
How do you price a PEB early on?
A budget rate against provisional tonnage is offered up front, so you can compare against your build plan. Firm pricing follows the approved design and material specification.
Send the
drawing, the
DXF, or just
the tonnage.
Laser cutting, material, a full turnkey package or a contract crew — tell us which and you will get a named person, a buildable view and an honest programme.
- Works & stockyardLiluah, Howrah
West Bengal, India - Head office22 Strand Road
Kolkata 700 001, West Bengal - Project enquiriesprojects@steeltechglobus.com
- Laser & tradingsales@steeltechglobus.com
- Telephone+91 91239 93022+91 62897 33378
- WhatsApp+91 91239 93022
- LinkedInSteeltech Globus ↗
- Instagram@steeltechglobus ↗
- Working hoursMon–Fri · 11:00–20:00
Sat · 11:00–18:00
Replace the address, emails and phone number with your real details.